全站搜索
简繁转换
Details
Can not ignore the cost of projector lamp maintenance tips
Author:管理员    Published:2016-11-08 20:29:53    Text Size:【BIG】【MIDDLE】【SMALL

One, in the layout of the environment should pay attention to the layout of a few points:
1 set the curtain to block out the outdoor light
2 the top of the screen or near the light source should be closed
3 wall, floor as far as possible not to use easy reflective material
4 part of the range of lighting, can use the spotlight
5 select the projector screen with the environment

Two, the use of the process should pay attention to several points:
1 a clean use environment. In order to prevent dust from entering the interior of the projector with the fan, a filter screen is arranged at the entrance of the fan to prevent dust from entering the projector. In this way, once the projector's working environment more dust, a large number of dust will be the wind fan rotation accumulation in the filter net, blocking filtering network, affect the cooling effect. And smoking is more harmful, the tar in the smoke will not only be adsorbed on the filter on the Internet to form a viscous material, and the sticky material in turn will adhere to dust, so as to completely block the filter screen. And some substances in the smoke can enter the filter through the projector, the imaging element, influence projection effect of fouling did not say, will be covered in the light bulb, the bulb radiating effect, shorten the service life of the bulb.
2 to prevent the projector "heat stroke". We must pay attention to the use of ambient temperature and ventilation conditions when using the projector. Here, we must pay special attention to the following three points: first, the projector at work, make sure nothing blocking cooling ventilation holes or projector; secondly, the completion of the work of the projector and normal shutdown, don't use something immediately or into the collection bag cover projector; finally, in the use of the projector, pay attention to don't let the sun to the projector, especially the lens part, because of the strong sunlight will not only affect the heat dissipation of the projector, more important is to spoil the image projector optical system, affect the life and display effect.

Summary: projector bulbs are easy to consume goods, we hope to extend the projector lamp method has an understanding, in the use of the process as far as possible to avoid these non-standard operation

脚注信息
Copyright 2009-2016 (C) Shenzhen huaruiyuanyang Technology Limited